1. 09 Mar, 2019 1 commit
  2. 13 Dec, 2018 5 commits
  3. 28 Nov, 2018 1 commit
  4. 27 Nov, 2018 1 commit
  5. 27 Sep, 2018 1 commit
  6. 23 Sep, 2018 1 commit
  7. 23 Jul, 2018 1 commit
    • Eric - kg6wxc's avatar
      Bugfixes/Changes · bd572f6c
      Eric - kg6wxc authored
      Removed an errant "echo" that would cause output in "silent" mode.
      
      When the polling script parsed through the interfaces looking for the
      wlan MAC address and ip (and the LAN ip) it always had issues with the
      different versions of the json file on different firmwares.
      I think this has finally been solved.
      The polling script should pull the proper info from even a 3.15.1.0 node
      now and if those nodes have location info they should now appear on the
      map too.
      The admins of those devices should be strongly reminded to update!!
      
      I mistakenly removed the red and green dot from the status area of the
      admin page. They are restored now.
      
      Parallel node polling will work now, but it is not recommended on large
      networks, as there is still no control over how many scripts are
      spawned. Small networks of should be just fine.
      (this has been tested many times on a network of 20-30 (sometimes 100's)
      with no issues)
      Use at your own risk though.
      
      New warnings in "Test Mode" to alert when a nodes location has been
      "fixed" or not. It's very noticable now.
      
      Some general clean up/typo fixing and removal of things that were long
      due for removal.
      
      fixed some file attributes.
      
      Added some things to be used in the near future but are not done yet.
      
      73
      bd572f6c
  8. 21 Jul, 2018 1 commit
    • Eric - kg6wxc's avatar
      BugFixs/Enhancements/Additions · 6e0fb623
      Eric - kg6wxc authored
      Can change the non mesh markers info without having to recreate now.
      
      The polling script can now find the info for some nodes that it could
      not before, such as firmware 3.15.1.0b4, this was a pleasant side effect
      of trying to remove some of the bunk entries i nthe database.
      
      The polling script will now also try to check and "fix" the database,
      this is due to changes in the newer AREDN firmwares (anything beyond
      3.17RC1)
      Some of those changes were made by me, just for the map. :)
      These DB "fixes" also include removing some columns that were no longer
      and were making the DB much larger than it needs to be, this will also
      help cut down on the memory footprint when loading the webpage.
      
      The numbers at the bottom of the map reflecting nodes and link, should
      be more accurate now (I hope).
      
      The Map legend has been change to use pure HTML5/CSS, the only images
      are the small circle icons, this may cause issues with very old
      browsers...
      
      Removed some files that were no longer needed or forgetten about.
      6e0fb623
  9. 17 Jun, 2018 1 commit
    • Eric - kg6wxc's avatar
      BugFix get-map-info wxc_functions · e8947ee9
      Eric - kg6wxc authored
      Fixed the "ignored nodes" check. Nodes and devices that get ignored due
      to 404/no route to host/connection refused errors, will now be properly,
      and temporarily skipped over by the polling script.
      e8947ee9
  10. 10 Jun, 2018 1 commit
    • Eric - kg6wxc's avatar
      BugFix: More 5GHz channels, 900MHz nodes now found by 'board_id' · a3dd4c4a
      Eric - kg6wxc authored
      Added 'non-US' 5GHz channel numbers.
      
      Device band was determined by channel, 900MHz and 2.4GHz have some of
      the same channel number and the script had a hard time telling which was
      which.
      This has (hopefully) been fixed now. Since there are only 3 AREDN
      compatible 900MHz devices, it was easier to just find those certain
      board_id's. This also allowed channel #4 to be added back into the list
      for 2.4GHz. (yes it was a hack but mostly worked :) )
      
      Additionally, I've been trying to optimize the map_function.inc file.
      A couple of the functions in that file consume 90%+ of the time it takes
      to render the webpage. (load_LinkedTO() is a beast!)
      On the cloud server this can sometimes completely stall the script(s)
      and fail to load the page at all.
      a3dd4c4a
  11. 09 Jun, 2018 1 commit
  12. 08 Jun, 2018 1 commit
  13. 24 May, 2018 2 commits
    • Eric - kg6wxc's avatar
      Bugfix get-map-info.php · 47b93eea
      Eric - kg6wxc authored
      (I knew I would miss something!!)
      
      Missed removing a deleted column from the sql query.
      
      Also changed some comments on a function in wxc_function file.
      47b93eea
    • Eric - kg6wxc's avatar
      Bugfix/Update/Enhancement Admin pages · bfbf4570
      Eric - kg6wxc authored
      Finally finished a rough version of some admin pages that allow for
      maintenance of the DB, fixing node locations, removing nodes, etc...
      Username/Password is required to use the admin pages.
      You must create an intial user/password.
      When you first load the admin page it will ask you to create an initial
      user.
      This initial user is a "super user" and will be able to create other
      users.
      (more info is on the admin pages themselves)
      
      Fixed a stupid mistake in export2csv.php.
      
      Rearranged the columns in the node_info datebase which make the data
      more readable when exported as CSV file.
      
      Removed old DB columns that were now unused.
      
      Changed the *.css-default file(s) to *-default.css so that IE will use
      them without complaints.
      
      More than a few other little changes here and there...
      bfbf4570
  14. 02 May, 2018 1 commit
    • Eric - kg6wxc's avatar
      Changed to use default ini and other user editable files. · 8fbe3dfe
      Eric - kg6wxc authored
      There is no longer a user-files.tar.gz file!
      
      The user must remove the "-default" from the file extension, save the
      file and then make their own changes. I have seen many other programs
      use this and it seems to make sense.
      The README has been updated to reflect this change.
      Other ideas are appreciated still! :)
      
      With the exception of user-settings.ini, the code will check for the
      existance of the non "-default" files and use those instead of the
      default ones.
      Also if the user does not create a user-settings.ini file of their own
      an error will be thrown telling them such.
      
      Fixed the Popup for "total number of link" in the attributon bar.
      
      Some new values were added to the meshmap.css file in order to make it
      easier for the user to make customizations to the page if they want.
      More of these will probably be added in the future.
      8fbe3dfe
  15. 20 Apr, 2018 1 commit
  16. 25 Mar, 2018 1 commit